How to Properly Paint Stained and Varnished Woodwork

Paint will adhere to wood surfaces, even those that recently have a layer of stain or lustrous varnish. The surface must be roughed up for proper bond, so taking the steps vital to enough get ready the finish for paint produces the best effects. Roughed, scratched surfaces permit the paint to bond better and the scratches are concealed in the wake of applying paint.

  1. Remove cabinet doors by unscrewing the pivots. Consume space doors off their pivots by tapping out the pins that hold the door in place on every pivot. Use a sledge and a screwdriver to begin the pin evacuation, then haul them out by hand. Be watchful as you remove the final pin because the door will probably turn free of its frame. Baseboard and molding is best left in place for painting since these components are nailed in place. Since doors are removable and overwhelming, its less demanding to arrange and finish them on an even surface, for example a workbench or table.
  2. Scrape the surface of the woodwork by sanding with 180-gravel sandpaper. It isn’t indispensible to remove the old finish – stain or varnish – just work the paper over it enough to roughen it a bit. Cover the sum of the woodwork to guarantee even bond. As you advancement, you will perceive the stain and varnish getting more dull and a development of sanded material will shape or succumb to the thing.
  3. Remove the development by wiping down the woodwork with a tack material, a bit of cheesecloth impregnated with gums that make it sticky. As you wipe, turn the tack fabric to determine it stays sticky.
  4. Apply a cover of oil-based, stain-blocking preparation with a brush to cause arrange the wood to acknowledge a top layer. Previously varnished or stained surfaces respond best with oil-based preparations. The stain-blockers work to hold back old stain color and any scrapes or marks that may be on the wood. Let the preparation dry for the measure of time proposed by the producer, ordinarily overnight.
  5. Sand the dried preparation quite lightly with 180-gravel sandpaper. Sand just enough to lay wood strands back up and lightly scrape the first stage so the top layer of paint will follow better. Wipe off any sanding dust with a tack fabric.
  6. Brush on a layer of oil-based paint in your wanted color. Cover all the preparation. Assuming that a second layer is proposed or craved, make sure to permit the first cover to dry thoroughly before adding the second layer.
  7. Re-join the cabinet doors by screwing the pivots go into place and re-hang doors, then embed the pivot sticks after all covers of paint have dried enough for the woodwork to be took care of without damaging the finish.

Related Post