How to Fix a Cabinet Door With Wood Glue

Your kitchen cabinets are the point of convergence of your kitchen. Provided that your kitchen cabinets are in poor working request, it can destroy the whole look of your kitchen, regardless of the possibility that the cabinets are new. Intermittently, a straightforward tightening of a screw can fix a drooping cabinet door, yet there are times when the damage is considerably more impressive and the use of wood glue is indispensible to effectively get your door working properly.

  1. Remove the pivots from the cabinets using a screwdriver. Contingent upon the detached territory, it might just be indispensible to remove the cabinet from the base leaving the pivot whole with the cabinet door.
  2. Drill the holes where the screws were placed to clean them out using a ½-inch boring apparatus. It may be vital to repair holes on the build cabinet and with respect to the cabinet door. Bore out all holes that appear to be detached making a point not to penetrate so profound as to experience the wood.
  3. Cut ½-inch dowel poles to fit the holes using a little handsaw. Make certain the bars are reduced to a length that is flush to the outside of the hole. Fit the dowel poles to size preceding loading with wood glue.
  4. Fill the holes with wood glue.
  5. Embed ½-inch wood dowel poles into the holes. Wipe off any abundance glue that may have crushed out with a material. Permit them to dry completely.
  6. Sand the repaired range to remove any overabundance glue using sand paper. Use light force to decline the plausibility of damaging the cabinet finish that the pivots won’t stow away. Sand until all rough territories are smooth.
  7. Touch up the range with a matching finish if fundamental and permit it to dry completely.
  8. Reattach the pivots to the door and connect the cabinet door by screwing into the dowel poles. Guarantee the door opens and closes easily. Make any adjustments fundamental to get a tight and smooth operation.

Related Post